QR code of the Keyway Master website

Product InformationHOME / PRODUCTS / Slotting Head

TS-125 Slotting Head for Milling Machines – EASTAR Keyway Master

Product Name : 
Slotting Head

Model : 
TS-125

product manual
TS-125 slotting head, milling machine attachment, with three mounting methods

SLOTTING HEAD TS-125 — Milling Machine Attachment

Request a quote or e-mail sales@eastar.com.tw

Patented No. 192183

Features

  1. Special design worm and worm gear with linkage transmission mechanism, well construction and highly power output.
  2. The ram-sliding surface are hardened and precision ground.
  3. Built in lubricating system for smoothly running and prolong the life of head.
  4. Available mounting on any type milling machine back side of the ram.

Specifications

ItemTS-125
Stroke125mm (5")
No. of stroke speed change5 steps
Stroke speed (stroke/min.) 50HZ30, 47, 69, 98, 140 spm
Stroke speed (stroke/min.) 60HZ35, 54, 79, 112, 160 spm
Driving Motor3/4HP-6P

Interested in the TS-125? Ask for a quotation

Send your workpiece drawing – reply within 2 business days.

You can also e-mail our sales team: sales@eastar.com.tw

Ask for a quotation

Optional Accessories

  1. Flange A
  2. Flange B
  3. Slotting bar

Application (Recommend 1, 2 mounting method)

  1. Direct mounting
  2. Mounting with flange A
  3. Mounting with flange B

Above information are for reference only. The machine design, specifications and construction are subject to change without prior notice.

Drawings X and Y: how to choose a suitable flange (direct mounting, flange A, flange B) for mounting the TS-125 slotting head on a milling machine

Choose Suitable Flange For Mounting The Slotting Head On Your Milling M/C

  • a. Direct mounting — If your milling m/c ram end can be machined as following dimension (Drawing X), the slotting head can mount on the milling m/c directly, no need extra flange.
  • b. Mounting with flange A — If your milling m/c ram is tailless type but no enough area to drill as drawing X, you have to order the optional Flange A and finish the ram end as drawing Y, then the slotting head will be able to mount on the milling m/c through Flange A. (1) A surface must 90° with B Ram slideway. (2) The A surface must be not over our Flange A size Ø215mm.
  • c. Mounting with flange B — If your milling m/c ram is tailed type, you have to order the optional Flange B, then the slotting head will be able to mount on the milling m/c through Flange B.

Please note

The standard size of Flange B: A size is available for 73~80mm, B size is 60±1mm, C size is Ø22mm. If the ram tail size of your Mill is special size, you have to let us know the following A, B, C size when placing the order. If the ram tail size of your Mill is special size, then you grind it to suit for our standard. If the B point is less than 60mm it is ok, but don't less than 50mm.

Slotting bars with HSS cutter for TS-125 slotting head: 6 mm, 7 mm, 8 mm, 10 mm

Slotting Bar With HSS Cutter

Available sizes: 6 mm, 7 mm, 8 mm, 10 mm.