QR code of the Keyway Master website

Frequently Asked QuestionsHOME / FREQUENTLY ASKED QUESTIONS

The questions buyers ask most about Keyway Master slotting machines, slotting tools, delivery, service and certification.

1.What is a keyway slotting machine (slotter) used for?

A slotting machine, or slotter, is a keyway processing machine that cuts keyways and other shapes inside a bore. EASTAR Keyway Master machines specialise in inner hole keyway slotting: through hole and blind hole keyways, taper and helical keyways, splines, and square, hexagon and polygon holes.

2.What is the difference between a CNC slotting machine and a conventional slotting machine?

On a conventional (manual) slotting machine such as the TS-200K, TS-300K and TS-350K, the X and Y feed and the dividing are done by hand. A CNC slotting machine (CNC slotter) moves the axes by servo motors under a CNC controller, so keyway depth, multiple cuts and indexing run automatically.

3.What is the difference between the TS-K, A1 and 3-axis CNC models?

TS-200K / TS-300K / TS-350K have manual X and Y feed and manual dividing. CNC-200A1 / CNC-300A1 / CNC-350A1 add CNC automatic Y-axis feeding with manual dividing. CNC-200 / CNC-300 / CNC-350 have automatic X and Y feeding and automatic dividing. Because the X axis of the A1 models is manual, their X travel is longer (CNC-300A1 / CNC-350A1: 460 mm) than on the servo-fed 3-axis models (CNC-300 / CNC-350: 432 mm).

4.What do the 4-axis and 5-axis CNC slotting machines add?

CNC-450 and CNC-700 control the X, Y, C (rotary table) and Z (ram) axes, with a CNC-controlled stepless stroke (CNC-450: 10–475 mm; CNC-700: 10–700 mm) and a slotting linear speed of up to 20,000 mm/min on the CNC-450. On the CNC-450, CNC-450S and CNC-700 the ram is driven by a servo motor directly coupled to a ball screw (direct-drive system). On the CNC-450S the upper and lower dead points of the ram are set with the MPG hand wheel. CNC-450S adds an A axis: a BT50 powered spindle head driven by an AC servo motor through a 1:2 gear set.

5.Can the machines slot both through hole and blind hole keyways?

Yes. Every EASTAR CNC slotting machine can cut both through hole and blind hole keyways, including the CNC-200, CNC-300, CNC-350, CNC-300S, CNC-350S, CNC-450, CNC-450S and CNC-700. The key is choosing the right tool, not the machine. Through hole keyways are cut with standard slotting tools, such as square or round slotting bars with HSS blades. Blind hole keyways need a blind-hole tool; EASTAR recommends the dedicated REV blind-hole slotting tool, with which blind hole keyways can be machined on any of these machines.

6.Can several keyways be cut in one setup (multi-keyway slotting)?

Yes. Models with automatic dividing – CNC-200 / CNC-300 / CNC-350, CNC-300S / CNC-350S and the 4- and 5-axis CNC models – index the rotary table automatically between keyways, so multiple keyways in one bore are cut in one setup. On the TS-K and A1 models the dividing is manual.

7.Can the machines do spline processing and cut square or hexagon holes?

Yes. Special inner hole slotting such as internal splines, square, hexagon and polygon holes and grooves is listed as available. Keyways with a special width or tolerance can be divided into multiple cuts by a single tool.

8.Why choose slotting instead of broaching or a key seater?

According to EASTAR, slotting cutters are inexpensive, readily available off the shelf and can be resharpened, so the total running cost (machine, cutters and consumables) is lower than with key seaters or broaching machines. EASTAR also states that machining time is shorter than with wire cutting machines.

9.Can taper (conical) and helical keyways be cut?

Yes. On the 200 / 300 / 350 series (including CNC-300S / CNC-350S) and TS-K models the head swivels ±30° for taper keyways. CNC-450 / CNC-450S have a ±30° swivel head that is also used for helical cutting; the CNC-700 ram swivels ±20°.

10.Which CNC controller is used, and is programming difficult?

The CNC models use a SYNTEC (WIN-CE) controller with standard G/M code and conversational programming: the operator enters the keyway data in a dialog screen and the program is generated automatically. An MPG hand-wheel simulation lets the operator test-run a new program to avoid crashes. Standard controller languages are Chinese and English; other languages can be developed on request.

11.Can I add slotting to my milling machine with a slotting head?

Yes, with the TS-125 slotting head: stroke 125 mm, five stroke speeds (35–160 spm), mounted on the back side of the ram of any ram-type milling machine, with three mounting methods (direct, flange A, flange B). Patent No. 192183.

12.Which model fits my workpiece size?

The ram stroke sets the maximum keyway length range: 200 mm (TS-200K, CNC-200A1, CNC-200), 300 mm, 350 mm, 10–475 mm (CNC-450 / CNC-450S) and 10–700 mm (CNC-700). Working tables are Ø400 mm, Ø560 mm or, on the heavy-duty CNC-700, Ø850 mm with a 2,000 kg table load. Send your workpiece drawing through the quotation form and EASTAR will recommend a model.

13.Which slotting tool systems are available?

Round-type slotting tools (200 / 300 / 350 series, including CNC-300S / CNC-350S, and TS-125), square-type slotting bar systems, REV tool systems, and dedicated slotting tool systems for CNC-450, CNC-450S (BT50 taper shank) and CNC-700 (adapter set SSAD-95). Tool clamping seats are available for round, square and REV bars.

14.How are the slotting tools sharpened?

The SLTG-520 grinder is designed for HSS square slotting tool bits and lathe tools, with a dedicated tool-bit fixture, protractor and tilt function. The SLTG-600 is a floor-type tool grinder with cooling water.

15.What optional accessories are offered?

Halogen lamp, digital readout, cooling system, clamping kits, 3-jaw chuck, blade grinder, automatic tool backing-off device, transformer, magnetic chip separator, screw chip conveyor, slotting bars, slotting tools and HSS cutters.

16.Where are EASTAR slotting machines made, and how do I get a quotation?

All Keyway Master slotting machines are built by EASTAR Machine Tools Corp. in Taichung, Taiwan, a manufacturer since 1967 that exports to over 60 countries. Every EASTAR machine is made in Taiwan: built locally in Taiwan from Taiwanese raw materials. Use the online quotation form (12 languages, workpiece drawings and photos can be attached) or e-mail sales@eastar.com.tw; EASTAR replies within 2 working days.

17.What is the delivery time?

About 45 days for the conventional TS-K models and the A1 models (CNC-200A1 / CNC-300A1 / CNC-350A1), and about 60–90 days for the 3-axis, 4-axis and 5-axis CNC slotting machines.

18.What warranty is provided?

EASTAR slotting machines come with a one-year warranty.

19.How are installation, training and after-sales service provided outside Taiwan?

Installation, operator training and after-sales service are provided locally with the support of EASTAR's authorised agents.

20.What keyway widths can be slotted?

Keyway widths from 2 mm to 200 mm, depending on the model and tool system.

21.What accuracy can be achieved?

Keyway width tolerance of ±0.01 mm (0.02 mm in total) for standard keyways, and parallelism of 0.02 mm per 200 mm of keyway length (0.02/200 mm).

22.Can the machines be customised?

EASTAR builds standard machine models and does not build custom machines. Fixtures, jigs and slotting tools can be customised for your workpiece.

23.How long are spare parts available?

Spare parts are supplied for 15 years.

24.How are the machines packed and shipped?

TS-200K, TS-300K, TS-350K, CNC-200A1, CNC-300A1, CNC-350A1, CNC-200, CNC-300, CNC-350, CNC-300S, CNC-350S, CNC-450 and CNC-450S are packed in wooden crates. The CNC-700 is shipped in an open-top container.

25.Do the machines meet CE requirements, and is EASTAR ISO 9001 certified?

Yes. EASTAR manual and CNC slotting machines (TS-K, A1, 3-axis, 4-axis and 5-axis models) comply with the EU Machinery Directive 2006/42/EC and the standards EN ISO 12100:2010, EN ISO 13849-1:2023 and EN 60204-1:2018, confirmed by UDEM Attestation of Conformity No. M.2024.206.T17195 (valid until 24 December 2027). EASTAR's quality management system is certified to ISO 9001:2015 by CAC Conformity Assessment Center (certificate No. KY-26644, valid until 5 August 2027), with the scope design, manufacture and sales of CNC slotting machines and machine tools. Copies of the certificates are available on request.

Ask for a quotation

ctaText

Ask for a quotation